CUSTOM PALISADE UPGRADES!  SUPER SALE! ALL PRICES HAVE BEEN LOWERED! LIMITED TIME ONLY! CLICK HERE

Blind spot system problem

G

Gus

New member
Joined
Dec 6, 2019
Messages
9
Reaction score
0
Points
1
After 1000 on my new palisade the blind side monitoring system quit working
Got a quick message on right side of screen to check blind side monitoring system plus a red small triangle with a red circle with the number 1
 
Yep, see thread further down below. Seems to be an issue popping in some Palisades all of a sudden. Mine is with the dealer now. Will see what they say but I suspect they will just reset it.
 
They said the other dealership in town had a few of these as well. Reset the system and said to let them know if it comes back on. Said it takes about 60 miles before it calibrated itself again. Said that’s what the other dealership did and nobody has been back. Driven about 60 miles since and so far so good. Let’s hope it stays.
 
cybersp780 said:
They said the other dealership in town had a few of these as well. Reset the system and said to let them know if it comes back on. Said it takes about 60 miles before it calibrated itself again. Said that’s what the other dealership did and nobody has been back. Driven about 60 miles since and so far so good. Let’s hope it stays.
Click to expand...
mine said they had to order a part and that the part is back ordered. Probably won't get it till Jan
 
my dealer said mine needed a part that is back ordered and will not be available to Jan
 
cybersp780 said:
They said the other dealership in town had a few of these as well. Reset the system and said to let them know if it comes back on. Said it takes about 60 miles before it calibrated itself again. Said that’s what the other dealership did and nobody has been back. Driven about 60 miles since and so far so good. Let’s hope it stays.
Click to expand...


hmmmm, I'm no enginerd, but what would there be to calibrate? the purpose of the system is very specific and the range is finite, so any calibration would seemingly need to be static if such a thing occurred. we ARE talking about the light in the window/HUD/dash alert, not the video right?
 
Not a clue about calibration, was just saying what the tech told me.

As for what if affects, it basically turns off the entire blind side monitoring system. So you don’t see it in the HUD or on the side mirrors at least in my experience. Until you turn off the car and back on again. So far, still working fine. Guess we will see.
 
hmm, i wasnt sure if it was the camera or the blinky beep beeps. in any other product one might say its a firmware thing, but I will be interested to see if this goes anywhere, maybe it is a one time aberation
 
Talking Sammich said:
hmm, i wasnt sure if it was the camera or the blinky beep beeps. in any other product one might say its a firmware thing, but I will be interested to see if this goes anywhere, maybe it is a one time aberation
Click to expand...
Not really my dealership days it's a recall and I drove off and 2 days later back on with same problem
 
Gus said:
After 1000 on my new palisade the blind side monitoring system quit working
Got a quick message on right side of screen to check blind side monitoring system plus a red small triangle with a red circle with the number 1
Click to expand...
 
Mine started failing at 1200. Would reset when I turned off the engine. At the dealer right now. Will post what they did when I get it back.
 
Gus said:
After 1000 on my new palisade the blind side monitoring system quit working
Got a quick message on right side of screen to check blind side monitoring system plus a red small triangle with a red circle with the number 1
Click to expand...
 
Dealer called and said it is a programing issue and to bring it in
 
You must log in or register to reply here.
Back
Top