CUSTOM PALISADE UPGRADES!  SUPER SALE! ALL PRICES HAVE BEEN LOWERED! LIMITED TIME ONLY! CLICK HERE

Rebadged my Palisade! Brenthon Installation

A

amir

New member
Joined
Nov 24, 2019
Messages
2
Reaction score
2
Points
3
Here are some tips who wants to DIY rebadging.
Bought the full set from this forum and the seller was superb! Offered $10 discount to help with shipping (During Black Friday)
1) used fishing wire, heat gun, goo gone wipes. 2) Front badge has couple of pronges in the center and tabs around it. see attached photos
3) rear badge was easy just be very careful with heat gun. It has two prongs in the middle. After dehesing the badge apply gentle pressure and should come off easily.
4) PALISADE sign was very easy to take off with heat gun and fishing wire. Probably you don’t need the wire if you apply adequate heat. I accidentally apply too much heat and mess up one spot.IF anyone has any idea how to fix it comment below, PLEASE.
4b) make sure to do some very careful calculation and measurements when apply BRENTHON sign.
5) For the wheels (steering and tires) just used their provided tapes. Hopefully it will hold on for long time.
FYI the front emblem does NOT hold strongly and came off very easily, so I reinforced it with 3M double sided tape. Also planning to do the same with the wheels too.
C6DB78C0-35EC-4FC3-A315-1E9662D84C81.jpeg4C64A037-EDB7-491E-8C4D-B2394AA14828.jpeg8D420FE9-4543-43C6-9A5C-DD9F77A7561A.jpeg0C47809B-E1A5-4F63-BBE1-FB468F512117.jpegE38D3F60-E8EC-40DA-9E32-376DC7B6B1FA.jpeg1997F651-1BC8-40BC-98EA-32D51177EC78.jpegEB649989-B369-4999-BCBE-DAF51C5257C9.jpeg4D496F13-22AF-400B-BDC6-7F805962FECD.jpeg7544F406-6268-4C21-B015-A56D254F1368.jpegE41A9AC1-B64A-4288-A880-5A57A323D6EC.jpegB078D04B-CFE1-438D-8420-E27ECFA36D1C.jpeg8DDB6738-21CC-4D85-B658-72EACF4D8F32.jpeg73B7A845-80E1-4114-AAF6-5B3D1BCB4091.jpegC6DB78C0-35EC-4FC3-A315-1E9662D84C81.jpeg4C64A037-EDB7-491E-8C4D-B2394AA14828.jpeg8D420FE9-4543-43C6-9A5C-DD9F77A7561A.jpeg0C47809B-E1A5-4F63-BBE1-FB468F512117.jpegE38D3F60-E8EC-40DA-9E32-376DC7B6B1FA.jpeg1997F651-1BC8-40BC-98EA-32D51177EC78.jpegEB649989-B369-4999-BCBE-DAF51C5257C9.jpeg4D496F13-22AF-400B-BDC6-7F805962FECD.jpeg7544F406-6268-4C21-B015-A56D254F1368.jpegE41A9AC1-B64A-4288-A880-5A57A323D6EC.jpegB078D04B-CFE1-438D-8420-E27ECFA36D1C.jpeg8DDB6738-21CC-4D85-B658-72EACF4D8F32.jpeg73B7A845-80E1-4114-AAF6-5B3D1BCB4091.jpeg
 

Attachments

  • BB9A9D6E-C0E6-4E37-9803-DEDDD524D386.webp
    BB9A9D6E-C0E6-4E37-9803-DEDDD524D386.webp
    89.2 KB · Views: 128
Last edited:
amir said:
Here are some tips who wants to DIY rebadging.
Bought the full set from this forum and the seller was superb! Offered $10 discount to help with shipping (During Black Friday)
1) used fishing wire, heat gun, goo gone wipes. 2) Front badge has couple of pronges in the center and tabs around it. see attached photos
3) rear badge was easy just be very careful with heat gun. It has two prongs in the middle. After dehesing the badge apply gentle pressure and should come off easily.
4) PALISADE sign was very easy to take off with heat gun and fishing wire. Probably you don’t need the wire if you apply adequate heat. I accidentally apply too much heat and mess up one spot.IF anyone has any idea how to fix it comment below, PLEASE.
4b) make sure to do some very careful calculation and measurements when apply BRENTHON sign.
5) For the wheels (steering and tires) just used their provided tapes. Hopefully it will hold on for long time.
FYI the front emblem does NOT hold strongly and came off very easily, so I reinforced it with 3M double sided tape. Also planning to do the same with the wheels too.
View attachment 325View attachment 326View attachment 327View attachment 328View attachment 329View attachment 330View attachment 331View attachment 332View attachment 333View attachment 334View attachment 335View attachment 336View attachment 337View attachment 325View attachment 326View attachment 327View attachment 328View attachment 329View attachment 330View attachment 331View attachment 332View attachment 333View attachment 334View attachment 335View attachment 336View attachment 337
Click to expand...
Not of fan of this re-badging thing..like buying shoes at walmart and putting a Nike Swoosh on them....but to each his own....sharp Limited ..how long have you had it ..do you like it..any problems....one exterior feature I find odd,is that the Limited version does not have it stated on the rear of the vehicle..I should be getting my white with beige in a few weeks..
 
Why would anybody want to do this?! I also don't understand the badge thing either. Too many undergrad and graduate psych courses I guess!!! :eek:

Tom
 
Montanagrizzfan said:
Why would anybody want to do this?! I also don't understand the badge thing either. Too many undergrad and graduate psych courses I guess!!! :eek:

Tom
Click to expand...

Sorry Tom, not for you to understand. My car, my payments, my decision. Besides, the hideous H went to good use.

image.jpg
 
I like the way the badges look, but I honestly don't understand what Brenthon actually is. Are they a concept car company? Do they do aftermarket stuff in the Korean market for Hyundai vehicles?
 
Jason asks: "Do they do aftermarket stuff in the Korean market for Hyundai vehicles?"

They (Brenthon) have obviously hook quite a few people Stateside!!! 😱

tpr
 
I have a little experience with taking an existing brand and re-branding or co-branding it as something else.

Todd Snyder + Timex

IMG-8203.jpg


Invicta + Mickey Mouse

IMG-8210.jpg


Callaway + GM

17157587-10154675223319087-242952808569437653-o.jpg


image-62.jpg


I even used UNDONE to make my own watch.

CVP.png


CVP2.png
 
  • Like
Reactions: NVS
Right! So they can look like everyone else!! Same goes for tattoos, green hair and nose bolts. Just think, you'll think this way too when you're 80!!
 
amir said:
Here are some tips who wants to DIY rebadging.
Bought the full set from this forum and the seller was superb! Offered $10 discount to help with shipping (During Black Friday)
1) used fishing wire, heat gun, goo gone wipes. 2) Front badge has couple of pronges in the center and tabs around it. see attached photos
3) rear badge was easy just be very careful with heat gun. It has two prongs in the middle. After dehesing the badge apply gentle pressure and should come off easily.
4) PALISADE sign was very easy to take off with heat gun and fishing wire. Probably you don’t need the wire if you apply adequate heat. I accidentally apply too much heat and mess up one spot.IF anyone has any idea how to fix it comment below, PLEASE.
4b) make sure to do some very careful calculation and measurements when apply BRENTHON sign.
5) For the wheels (steering and tires) just used their provided tapes. Hopefully it will hold on for long time.
FYI the front emblem does NOT hold strongly and came off very easily, so I reinforced it with 3M double sided tape. Also planning to do the same with the wheels too.
View attachment 325View attachment 326View attachment 327View attachment 328View attachment 329View attachment 330View attachment 331View attachment 332View attachment 333View attachment 334View attachment 335View attachment 336View attachment 337View attachment 325View attachment 326View attachment 327View attachment 328View attachment 329View attachment 330View attachment 331View attachment 332View attachment 333View attachment 334View attachment 335View attachment 336View attachment 337
Click to expand...
What spacing between letters did you use for the lettering on the back lift gate?
 
You must log in or register to reply here.
Back
Top