Blind spot error

JR766

New member
Joined
Jun 26, 2020
Messages
3
Reaction score
0
Points
1
I've owned my Palisade SEL for 6 mo. and 6,200 mi, I've taken it now twice for blind spot error. This time it didn't fall under warranty because the sensors behind the bumper were covered in gravel dust. I paid the $160, but have to strongly consider a different vehicle that can withstand off hwy driving. I have 2.5 mi of gravel to drive to the hwy. I assumed an AWD SUV could handle these conditions
 
I've owned my Palisade SEL for 6 mo. and 6,200 mi, I've taken it now twice for blind spot error. This time it didn't fall under warranty because the sensors behind the bumper were covered in gravel dust. I paid the $160, but have to strongly consider a different vehicle that can withstand off hwy driving. I have 2.5 mi of gravel to drive to the hwy. I assumed an AWD SUV could handle these conditions
Despite what Hyundai may call it, the Palisade is a CUV (crossover utility vehicle) not a SUV. The difference is that a true SUV designed for off-road use is a body-on-frame, and a crossover (like a sedan) has a unibody design.

Here is an explanation:

.
 
Wouldn't the easier solution be to learn how to clean the dust off the sensors periodically?
 
Wouldn't the easier solution be to learn how to clean the dust off the sensors periodically?
Even the car wash undercarriage spray doesnt reach what they dismantled to clean. The rear bumper was remove to clean the sensor mechanism.
 
Did you try compressed air? Sure blows dust out of most places and you can work the hose all around
 
The rear bumper was remove to clean the sensor mechanism.
Ok... so if you're going to be taking the vehicle on dirt roads a lot and you want to utilize the blind spot monitoring, part of your maintenance procedures needs to be removing the bumper to clear the sensors.

That, or try to find a way to protect the area where the sensors are from gravel dust.
 
Ok... so if you're going to be taking the vehicle on dirt roads a lot and you want to utilize the blind spot monitoring, part of your maintenance procedures needs to be removing the bumper to clear the sensors.

That, or try to find a way to protect the area where the sensors are from gravel dust.
I can tell you're comfortable with cars--I'd be afraid to remove my bumper. I thought it was just a wipe down situation, lol.
 
Despite what Hyundai may call it, the Palisade is a CUV (crossover utility vehicle) not a SUV. The difference is that a true SUV designed for off-road use is a body-on-frame, and a crossover (like a sedan) has a unibody design.

Here is an explanation:

.
Thank you for the explanation,
Ok... so if you're going to be taking the vehicle on dirt roads a lot and you want to utilize the blind spot monitoring, part of your maintenance procedures needs to be removing the bumper to clear the sensors.

That, or try to find a way to protect the area where the sensors are from gravel dust.
 
Back
Top